HOW TO CLEAN THE ENTIRE SHOWER WITH JUST ONE PRODUCT | July 29, 2024

One of the  parts of the bathroom  most affected by dirt and other problems is certainly the  shower cubicle  .

In fact, there are  limescale, dust and mildew stains here that  can be traced back to constant contact with water.

But did you know that you  only need one remedy to solve all these problems?  Oh well! Let’s see together what it is!

What will you discover?

• • 1 To remove mold
  • 2 For removing limescale deposits

• • 3 For polishing glass
  • 4 tiles and grout
  • 5 shower tray

• 6 warnings

Remove mold

Let’s start by   removing  the mold that we usually find in the corners of the shower cubicle, in the rails or on the silicone  and that  appears in the form of black spots.

As a remedy, we suggest using  vinegar,  an ingredient known for its cleansing, whitening and degreasing properties. Plus, it’s a  godsend against mold.  All you have to do is   pour  the vinegar onto a piece (or several) of microfiber and then place it along the rails and silicone.

Then let it  sit for at least an hour before scrubbing thoroughly with a toothbrush to remove all mold.  And that’s it!

For removing limescale deposits

Another problem that we often find in the shower cabin, in addition to mold, is the presence of  limestone  , which is formed by constant contact with water and  releases limescale deposits  , which usually accumulate on steel surfaces such as faucets and  appear as whitish spots.

Fortunately,  vinegar can also  help us in this case because it has polishing properties. We remind you that it is indeed possible  to make the stainless steel of the kitchen shine like a mirror!  To do this, you need to pour the vinegar into a spray bottle and spray it onto the faucet, shower pipe and shower head, then leave it to act for about 10 minutes  and  rub vigorously.

To more accurately remove limescale from the shower head and also unclog the clogged holes, you can try the bag trick, where you fill a plastic food bag with vinegar and   immerse the shower head inside  . Then tie the bag closed with a rubber band and let the shower head soak for about 30 minutes before rinsing it out  : no more limescale!

Share Share Share

Thanks for your SHARES!