Dish soap in the toilet, the solution to many problems: what happens if you try it? (Page 3 ) | July 20, 2024

Obviously, it is advisable to use protective rubber gloves and protect your eyes during handling. To speed up the reaction, add 2 or 3 liters of hot water and let this magical mixture act overnight. Especially if the obstruction is of organic origin, success is almost 100%.

Unlock a bathroom

A modern device you can use is called a “spring plunger.” It is a flexible hose that can do a lot, making it an effective solution if the blockage exceeds the first 20 centimeters.

It is often used by plumbers themselves. If you don’t have this tool at home, a wire hanger will suffice.

But be careful not to create problems with the toilet bowl. To do this, it is necessary to unroll the hook and wrap the end of the wire with a cloth.
Now all that’s left to do is move the tool you just created in all directions and use a rotating motion to remove the debris that has clogged the toilet.

Use dish soap in the bathroom.

If it’s a moderate clog, simply pour some dish soap into the container and pour a bucket of hot water up to the edge.

The weight of the water will help dislodge the obstruction. The water should be hot, it does not have to be boiling.

Then the water and detergent must be allowed to act. If after a while it no longer flows down the drain, you will need to use a manual plunger.

The manual plunger is a very effective tool and not only in the fight against toilet clogging. It’s always good to have one on hand, you can buy it at any home improvement store.
It takes a little brute force to use it, but don’t despair , it’s not difficult at all.

Then you need to place the plunger into the clogged toilet drain and start pumping hard. Of course, it is a good idea to always make sure that the plunger is completely submerged in the water (it must completely cover the opening of the siphon), otherwise it will be technique will not work.

If the plunger does not stick, it should be wrapped in a cloth or soaked in warm water before use. This will soften the rubber and make it adhere better.

With any luck, this will create pressure that will force any solid debris that has clogged the toilet out of the pipes. Under no circumstances should you attempt to flush the toilet again, as this can cause further problems.
Instead , using a pair of gloves you will have to try to throw everything directly into the trash.

In the worst case scenario, when a clogged toilet is full of water, you can try using the plunger again after emptying the toilet .

Draining the water may not seem like the most pleasant activity, but once you’re done, you can pick up a drain cleaner again and follow the tips in the previous paragraph.

Share Share Share

Thanks for your SHARES!